 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
The Amana® brand ACS9 93% AFUE Single-Stage, Multi-Speed
Gas Furnace features our patented, heavy-duty Million-Air™
stainless-steel heat exchanger and recuperative
coil. The next-generation SureStart™ silicon
nitride Hot Surface Ignition system increases reliability.
This furnace is run-tested for heating or combination
heating/cooling applications. With a heavy-gauge,
reinforced, insulated steel cabinet and durable
baked-enamel finish, the ACS9 can be installed in
a variety of locations.
Standard Features
§
Patented, heavy-duty Million-Air™ stainless
steel heat exchanger and recuperative coil for maximum
efficiency
§
Designed for multi-position installation —
downflow, horizontal right or left
§
Energy-saving PSC, multi-speed, direct-drive
blower motor
§
Quiet, corrosion-resistant, induced-draft blower
assembly
§
Integrated furnace control with improved diagnostics
§
Low-voltage terminal blocks
§
Top venting standard
§
Suitable for direct vent (2-pipe) or non-direct
vent (1-pipe) applications
§
Convenient left or right connection for gas and
electric service
§
All models comply with California NOx Standards
Cabinet Features
§
Heavy-gauge, reinforced, fully insulated steel
cabinet with durable baked-enamel finish
§
Attractive, two-tone gray finish
§
Foil-faced insulation lines the heat exchanger
compartment |
| |
|
|
|
|
Nominal CFM@
0.5” ESP |
|
| ACS90453BXA |
46,000 |
42,800 |
3.0 |
17½”
x 28” x 40” |
674 - 1,128 |
132 |
| ACS90703BXA |
69,000 |
64,400 |
3.0 |
17½”
x 28” x 40” |
657 - 1,201 |
135 |
| ACS90704CXA |
69,000 |
64,400 |
4.0 |
21”
x 28” x 40” |
1,095 - 1,661 |
135 |
| ACS90904CXA |
92,000 |
86,000 |
4.0 |
21”
x 28” x 40” |
1,062 - 1,566 |
156 |
| ACS90905DXA |
92,000 |
86,000 |
5.0 |
24½”
x 28” x 40” |
1,168 - 1,978 |
173 |
| ACS91155DXA |
115,000 |
106,500 |
5.0 |
24½”
x 28” x 40” |
1,159 - 1,906 |
175 |
|
| The
Amana® brand ACV9 93% AFUE Two-Stage, Variable-Speed
Gas Furnace features our patented, heavy-duty Million-Air™
stainless-steel heat exchanger and recuperative
coil. The next-generation SureStart™ silicon
nitride Hot Surface Ignition system increases reliability.
This furnace is run-tested for heating or combination
heating/cooling applications. With a heavy-gauge,
reinforced, insulated steel cabinet and durable
baked-enamel finish, the ACV9 can be installed in
a variety of locations.
Standard
Features
• Patented, heavy-duty Million-Air™
stainless-steel heat exchanger and recuperative
coil for maximum efficiency
• Designed for multi-position installation
— downflow, horizontal right or left
• Auto-Comfort mode
• 2-stage gas valve and super-efficient, quiet
variable-speed blower motor
• Quiet, 2-speed, induced-draft blower assembly
• Integrated furnace control with improved
diagnostics
• Low-voltage terminal blocks
• Top venting is standard
• Suitable for direct vent (2-pipe) or non-direct
vent (1-pipe) applications
• Convenient left or right connection for
gas and electric service
• All models comply with California NOx Standards
Cabinet
Features
• Heavy-gauge, reinforced, fully insulated steel cabinet
with durable baked-enamel finish
• Attractive, two-tone gray finish
• Foil-faced insulation lines the heat exchanger
compartment |
|
|
|
|
|
|
|
Nominal CFM @ 0.1”
- 0.8” ESP |
|
| |
|
|
|
| ACV90704CXA |
93.0 |
69,000 |
65,000 |
48,000 |
45,000 |
1.5 - 4.0 |
21” x 28” x 40” |
378 - 1,572 |
136 |
| ACV90905DXA |
93.0 |
92,000 |
87,000 |
64,000 |
60,100 |
2.0 - 5.0 |
24½” x 28” x 40” |
513 - 1,980 |
172 |
|
The
Amana® brand AMS8/ADS8 Single-Stage, Multi-Speed Gas
Furnaces feature our patented, heavy-duty, Million-Air™
stainless-steel heat exchanger and recuperative coil.
The next-generation SureStart™ silicon nitride hot
surface ignition system increases reliability and saves
energy. These furnaces are completely assembled at our
factory and run-tested for heating or combination heating/cooling
applications. With a heavy-gauge, reinforced, wrap-around
insulated steel cabinet and durable baked enamel finish,
these units can be installed in a variety of locations.
§
Multi-position installation (AMS8: upflow, horizontal
right or left; ADS8: dedicated downflow)
§
Energy-saving PSC, multi-speed, direct-drive blower
motor
§
Quiet, corrosion-resistant induced draft blower
§
Integrated furnace control with diagnostics
§
Low-voltage terminal blocks
§
Combination redundant gas valve and regulator
§
Rotating combustion air blower (AMS8) allows venting
the furnace through the top, right or left side
§
Specific models comply with California NOx Standards
§
Heat exchanger compartment lined with foil-face
insulation
§
Coil and furnace fit flush for easy installation
§
Convenient left or right connection for gas and
electric service
§
Bottom or side air inlet (AMS8)
§
Removable, solid-bottom (AMS8)
| The
Amana® brand AMS95 95% AFUE Single-Stage, Multi-Speed
Gas Furnace features our patented, heavy-duty Million-Air™
stainless-steel heat exchanger and recuperative
coil. The next-generation SureStart™ silicon
nitride Hot Surface Ignition system increases reliability.
This furnace is run-tested for heating or combination
heating/cooling applications. With a heavy-gauge,
reinforced, insulated steel cabinet and durable
baked-enamel finish, the AMS95 can be installed
in a variety of locations.
Standard Features
§
Patented, heavy-duty Million-Air™ stainless
steel heat exchanger and recuperative coil for maximum
efficiency
§
Designed for multi-position installation —
upflow, horizontal right or left
§
Energy-saving PSC, multi-speed, direct-drive
blower motor
§
Quiet, corrosion-resistant, induced-draft blower
assembly
§
Integrated furnace control with improved diagnostics
§
Low-voltage terminal blocks
§
Top venting standard; alternate flue/vent on
right
§
Suitable for direct vent (2-pipe) or non-direct
vent (1-pipe) applications
§
Convenient left or right connection for gas and
electric service
§
All models comply with California NOx Standards
Cabinet Features
§
Heavy-gauge, reinforced, fully insulated steel
cabinet with durable baked-enamel finish
§
Attractive, two-tone gray finish
§
Foil-faced insulation lines the heat exchanger
compartment
§
Bottom or side air inlet; removable, solid bottom
|
| |
|
|
|
|
Nominal CFM@
0.5” ESP |
|
| AMS950453BXA |
46,000 |
44,600 |
3.0 |
17½”
x 28” x 40” |
674 - 1,128 |
132 |
| AMS950703BXA |
69,000 |
66,400 |
3.0 |
17½”
x 28” x 40” |
657 - 1,201 |
135 |
| AMS950704CXA |
69,000 |
66,400 |
4.0 |
21”
x 28” x 40” |
1,095 - 1,661 |
136 |
| AMS950904CXA |
92,000 |
89,000 |
4.0 |
21”
x 28” x 40” |
1,062 - 1,566 |
158 |
| AMS950905DXA |
92,000 |
88,400 |
5.0 |
24½”
x 28” x 40” |
1,168 - 1,978 |
172 |
| AMS951155DXA |
115,000 |
110,500 |
5.0 |
24½”
x 28” x 40” |
1,159 - 1,906 |
175 |
|
| The
Amana® brand AMV8 Two-Stage, Variable-Speed
Gas Furnace features our patented, heavy-duty, Million-Air™
stainless-steel heat exchanger and recuperative
coil. The next-generation SureStart™ silicon
nitride hot surface ignition system increases reliability
and saves energy. These furnaces are completely
assembled at our factory and run-tested for heating
or combination heating/cooling applications. With
a heavy-gauge, reinforced, wrap-around insulated
steel cabinet and durable baked enamel finish, these units can be installed in a variety of locations.
§
Multi-position installation—upflow, horizontal
right or left
§
Auto-Comfort mode helps to efficiently create
and maintain a comfortable climate by intuitively
adjusting to the room’s environment
§
2-stage gas valve and super-efficient, quiet
variable-speed blower motor
§
Quiet, 2-speed, induced-draft blower
§
Integrated furnace control with diagnostics
§
Low-voltage terminal blocks
§
Rotating combustion air blower allows venting
the furnace through the top, right or left side
§
All models comply with California NOx Standards
§
Heat exchanger compartment lined with foil-face
insulation
§
Coil and furnace fit flush for easy installation
§
Convenient left or right connection for gas and
electric service
§
Bottom or side air inlet
§
Removable, solid-bottom |
| |
|
|
|
|
|
| AMV80704BXA |
69,000 |
55,200 |
1.5 - 4.0 |
17-1/2" x 28" x 29"
|
152 |
| AMV80905CXA |
92,000 |
73,600 |
2.0 - 5.0 |
21-1/2" x 28" x 39"
|
178 |
| AMV81155CXA |
115,000 |
92,000 |
2.5 - 5.0 |
21" x 28" x 39"
|
194 |
|
| The
Amana® brand AMV9 96% AFUE Two-Stage, Variable-Speed
Gas Furnace features our patented, heavy-duty Million-Air™
stainless-steel heat exchanger and recuperative
coil. The next-generation SureStart™ silicon
nitride Hot Surface Ignition system increases reliability.
This furnace is run-tested for heating or combination
heating/cooling applications. With a heavy-gauge,
reinforced, insulated steel cabinet and durable
baked-enamel finish, the AMV9 can be installed in
a variety of locations.
Standard Features
§
Patented, heavy-duty Million-Air™ stainless-steel
heat exchanger and recuperative coil for maximum
efficiency
§
Designed for multi-position installation —
upflow, horizontal right or left
§
Auto-Comfort mode
§
2-stage gas valve and super-efficient, quiet
variable-speed blower motor
§
Quiet, 2-speed, induced-draft blower assembly
§
Integrated furnace control with improved diagnostics
§
Low-voltage terminal blocks
§
Top venting is standard; alternate flue/vent
located on right side
§
Suitable for direct vent (2-pipe) or non-direct
vent (1-pipe) applications
§
Convenient left or right connection for gas and
electric service
§
All models comply with California NOx Standards
Cabinet Features
§
Heavy-gauge, reinforced, fully insulated steel
cabinet with durable baked-enamel finish
§
Attractive, two-tone gray finish
§
Foil-faced insulation lines the heat exchanger
compartment
§
Bottom or side air inlet
§
Removable, solid bottom |
|
|
|
|
|
|
|
Nominal CFM @ 0.1”
- 0.8” ESP |
|
| |
|
|
|
| AMV90453BXA |
96.0 |
46,000 |
45,000 |
32,000 |
30,800 |
1.5 - 3.0
|
17½”
x 28” x 40” |
380 - 1,320
|
133 |
| AMV90704CXA |
95.5 |
69,000 |
67,000 |
48,000 |
46,400 |
1.5 - 4.0
|
21”
x 28” x 40” |
378 - 1,572
|
135 |
| AMV90905DXA |
95.7 |
92,000 |
90,000 |
64,000 |
61,700 |
2.0 - 5.0
|
24½”
x 28” x 40” |
513 - 1,980
|
172 |
| AMV91155DXA |
95.8 |
115,000 |
109,000 |
80,000 |
77,400 |
2.0 - 5.0
|
24½”
x 28” x 40” |
514 - 1,980
|
175 |
|
| The
Amana® Distinctions™ brand GMS8/GDS8
80% AFUE Single-Stage, Multi-Speed Gas Furnaces feature our patented aluminized-steel
tubular heat exchanger and a Norton® mini-igniter
with patented, adaptive technology. These furnaces
are run-tested for heating or combination heating/cooling
applications. With a heavy-gauge, reinforced, insulated
steel cabinet and durable baked-enamel finish, these
units can be installed in a variety of locations.
Standard Features
§
Corrosion-resistant, aluminized-steel tubular
heat exchanger
§
Designed for multi-position installation —
GMS8: upflow, horizontal right or left; GDS8: dedicated
downflow
§
Energy-saving PSC, multi-speed, direct-drive
blower motor
§
Quiet, corrosion-resistant, induced-draft blower
assembly
§
Integrated furnace control with diagnostics
§
Low-voltage terminal blocks
§
Rotating combustion air blower (GMS8) that allows
venting the furnace through the top, right side,
or left side
§
Convenient left or right connection for gas and
electric service
§
Specific models comply with California NOx Standards
Cabinet Features
§
Heavy-gauge, reinforced, fully insulated steel
cabinet with durable baked-enamel finish
§
Foil-faced insulation lines the heat exchanger
compartment
§
Bottom or side air inlet; removable, solid bottom
(GMS8) |
| |
|
|
|
|
|
| DMS80453ANA
|
45,000 |
36,000 |
3.0 |
14"
x 28" x 39" |
120 |
| DMS80703ANA
|
70,000 |
56,000 |
3.0 |
14"
x 28" x 39" |
130 |
| DMS80704BNA
|
70,000 |
56,000 |
4.0 |
17-1/2"
x 28" x 39" |
143 |
| DMS80904BNA
|
90,000 |
72,000 |
4.0 |
17-1/2"
x 28" x 39" |
153 |
| DMS80905CNA
|
90,000 |
72,000 |
5.0 |
21"
x 28" x 39" |
163 |
| DMS81155CNA
|
115,000 |
92,000 |
5.0 |
21"
x 28" x 39" |
163 |
| DMS81405DNA
|
140,000 |
112,000 |
5.0 |
24-1/2"
x 28" x 39" |
183 |
| DDS80453AXA |
45,000 |
36,000 |
3.0 |
14" x 28" x 39"
|
120 |
| DDS80703AXA |
70,000 |
56,000 |
3.0 |
14"
x 28" x 39" |
130 |
| DDS80904BXA |
90,000 |
72,000 |
4.0 |
17-1/2"
x 28" x 39" |
153 |
| DDS81155CXA |
115,000 |
92,000 |
5.0 |
21"
x 28" x 39" |
163 |
|
| The
Amana® Distinctions™
brand GMS9/GCS9 Single-Stage, Multi-Speed Gas Furnaces feature a patented aluminized-steel
tubular heat exchanger and energy-efficient Hot
Surface Ignition system. These furnaces are run-tested
for heating or combination heating/cooling applications.
With a corrosion-resistant, painted steel cabinet,
these units can be installed in a variety of locations.
Standard Features
§
Corrosion-resistant, aluminized-steel tubular
heat exchanger and stainless-steel recuperative
coil for maximum efficiency
§
Multi-position installation—GMS9: upflow,
horizontal right or left; GCS9: down-flow, horizontal
right or left
§
Energy-saving, reliable Hot Surface Ignition
system, featuring a Norton® Mini-Igniter with
patented adaptive learning algorithm to maximize
igniter life
§
Energy-saving PSC, multi-speed, direct-drive
blower motor
§
Quiet, corrosion-resistant, induced-draft blower
§
Integrated furnace control with improved diagnostics
§
Low-voltage terminal blocks
§
Combination redundant gas valve and regulator
§
Top venting standard; alternate flue/vent on
right (GMS9)
§
Suitable for direct vent (2-pipe) or non-direct
vent (1-pipe) applications
§
Convenient left or right connection for gas and
electric service
§
All models comply with California NOx Standards
Cabinet Features
§
Heavy-gauge, reinforced, fully insulated steel
cabinet with durable baked-enamel finish
§
Attractive, two-tone gray finish
§
Foil-faced insulation lines the heat exchanger
compartment
§
Bottom or side air inlet; removable, solid bottom
(GMS9) |
| |
|
|
|
|
|
| DMS90453BXA |
46,000 |
42,800 |
3.0 |
17-1/2" x 28" x 40" |
132 |
| DMS90703BXA |
69,000 |
64,400 |
3.0 |
17-1/2" x 28" x 40" |
135 |
| DMS90704CXA |
69,000 |
64,400 |
4.0 |
21" x 28" x 40" |
136 |
| DMS90904CXA |
92,000 |
86,000 |
4.0 |
21" x 28" x 40" |
158 |
| DMS90905DXA |
92,000 |
86,000 |
5.0 |
24-1/2" x 28" x 40" |
172 |
| DMS91155DXA |
115,000 |
106,500 |
5.0 |
24-1/2" x 28" x 40" |
175 |
| DCS90703BXA |
69,000 |
64,400 |
3.0 |
17-1/2" x 28" x 40" |
136 |
| DCS90904CXA |
92,000 |
86,000 |
4.0 |
21" x 28" x 40" |
157 |
| DCS91155DXA |
115,000 |
106,500 |
5.0 |
24-1/2" x 28" x 40" |
171 |
|
| The
Amana® Distinctions™ brand GHS8
Single-Stage, High-Airflow
Gas Furnace features our patented aluminized steel
tubular heat exchanger and a Norton mini-igniter.
These furnaces are completely assembled at our factory
and run-tested for heating or combination heating/cooling
applications. With a heavy-gauge, reinforced, wrap-around
insulated steel cabinet and durable baked enamel
finish, these units can
be installed in a utility room, closet, alcove,
basement or attic.
Standard Features
§
Patented, aluminized-steel heat exchanger backed
by a 20-year limited warranty
§
Norton® mini-igniter with patented, adaptive
technology
§
Integrated furnace control with improved diagnostics
§
Designed for multi-position installation –
high airflow, upflow, horizontal right or left
§
40VA transformer for heating and air conditioning
control service
§
Rotating combustion air blower
§
Venting through the top, right, or left sides
§
Certified for Category I venting
§
Factory run-tested for heating or combination
heating/cooling application
§
Convenient left or right connection for gas and
electric service
§
Convertible to propane gas
§
Terminals for electronic air cleaner and humidifier
§
Some models comply with California NOx Standards
Cabinet Features
§
Heavy-gauge, reinforced, fully insulated steel
cabinet with durable baked-enamel finish resists
rust and corrosion
§
Attractive architectural gray paint finish
§
Coil and furnace fit flush for easy installation
§
Convenient left or right connection for gas and
electric service
§
Bottom or side air inlet; removable, solid-bottom |
| |
|
|
|
|
|
| DHS80453AXA
|
45,000 |
36,000 |
3.0 |
14"
x 28" x 39" |
120 |
| DHS80704BXA
|
70,000 |
56,000 |
4.0 |
17-1/2"
x 28" X 39" |
130 |
| DHS80905CXA
|
90,000 |
72,000 |
5.0 |
21"
x 28" x 39" |
153 |
|
|
|
| |
 |
|