Sunline ® 2000 Series (DCG) 036 - 072 Mbh

The convertible York Sunline 2000™ Series commercial rooftops line combines standard high-efficiency and advanced-economizer controls with unprecedented installation flexibility and low-installed costs. A single footprint size serves all units from 3 to 6 tons. Offered with Natural Gas heat.

Special Benefits

• All model sizes share a common, compact design cabinet in a single footprint for on-site flexibility.
• 10.0 SEER 80% AFUE
• 5 years Compressor, 10 years Heat Exchanger and 1 year other parts and labour warranty.
• Installation time and costs are reduced by easy power and control wiring.
• All units are factory-wired, piped, charged, and tested prior to shipment.
• Factory-installed options further reduce installation costs.
• Gas and electric utility knockouts are provided on unit side and bottom for easy connections.
• Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
• Wide range of indoor airflows using belt-drive blowers.
• Durable finish, made of powder-painted, galvanized steel to meet 750-hour salt-spray test demands.
• Full-perimeter base rails are permanently attached to provide a solid unit foundation and fork lift access.
• Compressor is internally protected against high pressure and temperature.
• Grooved copper tubes and enhanced aluminum- fin construction improve heat transfer.
• Heat exchangers are corrosion-resistant, with aluminized steel tubular construction for durability and long service life.
• Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
• Complete line of field-installed accessories, including low nox, propane and high-altitude conversion kits, motorized dampers, economizers, and single- and dual- enthalpy sensors are available.

Sunline ULTRA® Series (DHG) 3, 4, 5, 15 and 20 Ton

Available in cooling only and cooling with gas heat, these single-package units have high-cooling efficiencies, and the gas/electric models have impressive AFUE ratings. Convertible airflow design allows installation flexibility. A wide range of factory options, field-installed accessories, including economizers and motorized dampers, are available.

Special Benefits

• All model sizes share a common, compact design cabinet in a single footprint for on-site flexibility.
• 12.2 to 13.0 SEER / 9.5 to 10.0 EER/80% AFUE
• 5 Years Compressor, 10 years Heat Exchanger and one Year Other parts and labor warranty.
• Installation time and costs are reduced by easy power and control wiring.
• All units are factory wired, piped, charged, and tested prior to shipment.
• Factory-installed options further reduce installation costs.
• Gas and electric utility knockouts are provided on unit side and bottom for easy connections.
• Convertible airflow design means no panel cutting is required, and no accessory panel is necessary.
• Wide range of indoor airflows using belt-drive blowers.
• Durable finish, made of powder-painted, galvanized steel to meet 750-hour salt-spray test demands.
• Full-perimeter base rails are permanently attached to provide a solid unit foundation and fork lift access.
• Compressor is internally protected against high pressure and temperature.
• Grooved copper tubes and enhanced aluminum- fin construction improve heat transfer.
• Heat exchangers are corrosion-resistant, with aluminized steel tubular construction for durability and long service life.
• Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
• Complete line of field-installed accessories, including low nox, propane and high-altitude conversion kits, motorized dampers, economizers, and single- and dual- enthalpy sensors are available.

Predator (DM) 6-1/2 to 12-1/2 Ton

The most significant commercial rooftops advance in a generation is here. The 9.0 EER York Predator™ line. Flexible, single-package models in cooling and electric/gas heat configurations, with side and down airflow convertibility. A common footprint allows easy installation on a curb, slab, roof rack, or frame. Every unit is completely charged, wired, piped, and tested. Servicing is simple with a slide-out motor and blower. You’ll also discover foil-faced insulation for improved IAQ. Two compressors and independent refrigeration circuits ensure reliability.

Special Benefits

• A single 50 3/4" H x 59" W x 89" D cabinet size with a common 50 1/2" W x 80 5/8" D footprint means simple installation.
• 9.0 EER/80% AFUE
• 5 Years Compressor, 10 years Heat Exchanger and One year Other parts and labour warranty.
• Specify units for cooling only, cooling with electric heat, and cooling with gas heat.
• Two-stage heat/two-stage cool provides ultimate comfort.
• Convertibility for side or down airflow discharge, with single-enthalpy economizers used on either application.
• Choose from a wide range of factory-installed options and standards like dirty filter and disconnect switches, barometric relief and power exhaust, phase monitors, smoke detectors, stainless steel heat exchangers, and much more.
• The dual-circuit reliability of two compressors with independent refrigeration circuits, electronic spark ignition, and power-vented combustion.
• Install these compact units almost anywhere there’s a curb, slab, roof rack, or frame.
• Each unit is completely charged with R-22—wired, piped, and tested.
• All units are assembled and delivered on rigid, full-perimeter base rails, allowing for 3-way forklift access and overhead rigging.
• Tool-free maintenance with features like hinged doors for all-access panels and slide-out blower and blower motor tray.
• IAQ features like foil-faced insulation, pitched roof, and removable drain pan.
• Can be ordered practically ready for immediate installation.