 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
- The heater with the burner in
the middle
- The Ultimate in Even Heat Distribution
- The Middleman tube heater provides
the solution for long buildings with lower ceiling heights,
satisfying all comfort requirements while still providing
the high efficiency of radiant tube heaters
- Middleman radiant tube heaters
from Easy Radiant Works should be used whenever even
temperatures are required over the entire length of
the radiant tube
- Applications for Middleman heaters
include: spectator heating in ice arenas, spot heating
applications in manufacturing plants, greenhouses and
poultry brooding. As the BTU input of the heater is
split into two directions, there is no hot spot at one
end to contend with. This makes Middleman heaters ideal
for lower ceiling applications as well
- Middleman heaters
are being used successfully in poultry brooding applications
where precise even temperatures are demanded
- Burners are available
to convert you end fired radiant heaters into Middleman
heaters.
| EZ-Radiant High Intensity
Gas Infra-Red Heater |
| |
|
|
| |
|
|
|  |
|
- RA - Series
- Save on heating costs up to
50% or more!
- 30,000 - 150,000 BTUH
- Natural and L.P. Gas
|
| FEATURES: |
- 40,000 BTU ... Propane or
Natural Gas
- Hot Surface Glo-Bar ignition with Honeywell Self-Diagnostic Electronic
Module
- High radiant efficiency
- Totally enclosed burner
- Simple one man installation
- 24 Volt thermostat, hanging
chain & exhaust vent cap included
- Designed for horizontal or
angle mounting
- Prewired burner with 3-prong
plug for EZ 120 Volt wiring
- Approved for mounting as
low as 7 ft. from the floor
|
|
| Straight Model |
| |
|
|  |
| |
|
| Dimensions: |
Overall Length 22 ft.
Width 12 inches
Height 15 inches
3.5 x 16 gauge Steel tubing |
| |
|
|
| |
| U Shaped Model |
| |
|
|  |
| |
|
| Dimensions: |
Overall Length 11.5 ft.
Width 22 inches
Height 15 inches
3.5 x 16 gauge Steel tubing |
|
| |
| L Shaped Model |
|
| |
|
|
|
|  |
Dimensions: |
Overall Length 22 ft.
Width 12 inches
Length 15 inches
3.5 x 16 gauge Steel tubing |
|
| |
| Input Rating: 40,000 BTU
(0 - 4500 ft. above sea level)
Natural Gas & Propane
Manifold gas pressure:
Natural Gas: 3.5 W.C.
Propane Gas: 10.0 W.C.
Gas Connector size: 1/2 N.P.T. |
|
Electrical Rating: 115V, 60 Hz.
3 amps starting, 1 amp running
Gas Inlet Pressure:
Nat. Gas: 6.0 W.C. Min. - 14.0 W.C. Max.
Propane 11.0 W.C. Min. - 14.0 W.C. Max
Flue connection: 4 O.D. |
|
| Tube
Heater |
| |
- 60,000 BTUH to 200,000 BTUH
- 20 ft. to 80 ft.
- Designed for High Moisture
Application like Car Washes
- Corrosion resistant stainless
steel control housing
- Primary and secondary tubes
manufactured from high temperature moisture
resistant steel to prevent corrosion
- Permanently sealed moisture
resistant blower motor
- Fully automatic controls with
hot surface ignition
- Radiant tubes treated with
high temperature, high emmisive,
black coating, to maximize radiant efficiency
- Aluminum reflectors to maximize
radiant output to the floor and equipment (optional
side reflectors available)
- Factory installed and sealed
outside combustion air adapter.
- 120 Volt or 24 Volt thermostat
control allows for connection to remote sensing
stats or coin operated switching.
- Straight or "U" shaped
models available.
- Though the wall combustion
air inlet and exhaust.
|
|
|
| |
 |
|